China Best Sales Machinery Components Balancing Machine, Gear, Wheel, Pulley, Axle, Shaft, Grinding Spindle (PHQ-300H) idler pulley

Product Description

Balancing Machine for Grinding spindle (PHQ-300)

Modular structure:
Quick change-over from work piece to the next 
High balancing accuracy 
Infinitely variable DC drive 
Optimum operating height 
Installation without bolting 

Production Description:

Specially designed brackets transmit mechanical force with low vibration damping
Durable and reliable sensor possesses good linearity
Permanent calibration brings high accuracy with a permission of large initial unbalance amount
Belt-driving offers higher precision and easier operation
Advanced electrical measuring system and friendly man-machine interface
Modular design offers a wide range of application

 

Range of Application:

This balancing machine is widely used in balancing rotatable bodies, such as kinds of medium-sized and small-sized motors rotors, impeller, fans, crankshaft, turbocharger, water pump, roller, grinding wheel, main shaft of machine tool , textile machinery, tool , spindle, etc .. Driven by belt, equipped with Variable speed motor to drive .Which ensures high quality balancing and precision. quick booting ,easy operation. and high efficiency  

Special Features:

The measuring unit employs JP-580 Electrical Measuring unit is a system of top function and precision. It can be applied in all kinds of single/double plate and hard/soft bearing machines, and can be connected with different velocity and pressure sensors easily. The unit adopts industrial computer made in Xihu (West Lake) Dis.a Industry Co, which equiped with 17-inch LCD screen and Windows XP Operating System. Featuring with high running speed and reliabilitystrong dustproof and shakeproof ability, it is applicable to various industrial environments

Production Parameters: 

Technical data at a glance PHQ-160H PHQ-300H PHQ-500H
Max Mass of Workpiece(kg) 160 300 500
Max Diameter of Workpiece (mm) Φ1000 Φ1220 Φ1500
Distance Between Two Support Bearings (mm) 130~1270 130~1270 130~1270
Journal Diameter Scope of Workpiece (mm) Φ 15~753) Φ 15~753) Φ 15~753)
Diameter Scope of Driving Belt (mm) Φmax400 Φmax500 Φmax600
Rotational Speed when the Diameter of Driving Belt is 100mm (r/min)  756,11761) 756,11761) 756,11761)
Motor Power (kw) 1.52) 1.52) 2.22)
Length of Bed (mm) 1500 1500 1500
Min Achievable Residual Unbalance Amount (emar) ≤0.5g· mm/kg ≤0.5g· mm/kg ≤0.5· mm/kg

Type: Vibration Testing Machine
Maxcapacity: <1000KN
Accuracy Grade: 1
Load Way: Electronic Load
Loading Method: Dynamic Load
Display: Digital
Customization:
Available

|

Customized Request

gear pulley

How are gear pulleys used in the production of electronics and manufacturing?

In the production of electronics and manufacturing processes, gear pulleys serve a variety of important functions. They are utilized in different applications to facilitate precise movements, power transmission, and speed control. Here’s a detailed explanation of how gear pulleys are used in the production of electronics and manufacturing:

1. Conveyor Systems:

In electronics and manufacturing facilities, conveyor systems are frequently employed for the transportation of components, products, or materials between different stages of the production process. Gear pulleys play a key role in driving the conveyor belts, enabling the smooth movement of items along the assembly line. These pulleys ensure consistent speed and precise positioning, allowing for efficient and automated production workflows.

2. Robotics and Automated Machinery:

Gear pulleys are integral components in robotics and automated machinery used in electronics and manufacturing. They are employed in robotic arms, gantry systems, and other automated equipment to provide precise and controlled movement. Gear pulleys drive the motors that control the motion of the robotic systems, allowing for accurate positioning, assembly, soldering, or testing of electronic components and devices.

3. Printing and Labeling Equipment:

In electronics and manufacturing, gear pulleys are used in printing and labeling equipment. They are utilized to drive the printing heads, label applicators, or other mechanisms involved in printing or applying labels to products or components. Gear pulleys ensure consistent and precise movement of these components, facilitating accurate printing and labeling in high-speed production environments.

4. Testing and Inspection Systems:

Gear pulleys are employed in testing and inspection systems used in electronics and manufacturing. These systems often require precise and controlled movements for the accurate positioning of components or test probes. Gear pulleys drive the motors that control the movement of testing fixtures, allowing for precise alignment and contact with the tested components. This ensures reliable and accurate testing and inspection results.

5. Machinery Speed Control:

In various manufacturing processes, gear pulleys are utilized for speed control. By using different pulley sizes and ratios, operators can adjust the rotational speed of machinery components. This flexibility allows for customization of the production process according to the specific requirements of different tasks or materials. Gear pulleys enable manufacturers to optimize the speed of cutting tools, processing equipment, or assembly lines, ensuring efficient and precise manufacturing operations.

6. Automated Assembly and Packaging:

In electronics manufacturing, gear pulleys are used in automated assembly and packaging systems. They contribute to the precise movement and positioning of electronic components, ensuring accurate placement and alignment during the assembly process. Gear pulleys drive the motors that control the robotic arms, pick-and-place mechanisms, or other automated systems involved in component placement and packaging operations.

7. Maintenance and Replacement:

Regular maintenance and inspection of gear pulleys are essential to ensure their reliability and performance in electronics and manufacturing processes. Operators should check for wear, damage, or misalignment of the gear teeth and pulley surfaces. Proper lubrication and tensioning of belts or chains connected to the gear pulleys are also important for their smooth operation. Timely replacement of worn or damaged gear pulleys is crucial to avoid interruptions in production and maintain the efficiency of manufacturing operations.

In conclusion, gear pulleys are widely used in the production of electronics and manufacturing processes. They contribute to the precise movements, power transmission, speed control, and automation required for efficient and accurate manufacturing operations. Proper maintenance and replacement of gear pulleys are necessary to ensure their reliability and optimal performance in electronics and manufacturing facilities.

gear pulley

How does the gear ratio in a gear pulley affect its performance?

The gear ratio in a gear pulley has a significant impact on its performance, influencing various aspects such as speed, torque, and power transmission. Here’s a detailed explanation of how the gear ratio affects the performance of a gear pulley:

Gear Ratio Basics:

The gear ratio represents the relationship between the number of teeth on the driving gear and the number of teeth on the driven gear. It determines how many times the driving gear must rotate to make the driven gear complete one revolution. The gear ratio is typically expressed as a numerical ratio or as a fraction.

Speed:

The gear ratio directly affects the speed of the driven gear relative to the driving gear. A gear pulley with a higher gear ratio, where the driving gear has more teeth than the driven gear, will result in a lower speed at the driven gear. Conversely, a gear pulley with a lower gear ratio, where the driven gear has more teeth, will result in a higher speed at the driven gear. Therefore, the gear ratio determines the speed reduction or amplification between the driving and driven gears.

Torque:

The gear ratio also influences the torque at the driven gear. Torque is a rotational force that determines the system’s ability to overcome resistance or to perform work. A gear pulley with a higher gear ratio, where the driving gear has more teeth, will result in a torque amplification at the driven gear. This means that the driven gear can exert greater force or torque on the load or system it is connected to. Conversely, a gear pulley with a lower gear ratio, where the driven gear has more teeth, will result in a torque reduction at the driven gear. In this case, the driven gear will exert less force or torque, but it will be able to rotate at a higher speed.

Power Transmission:

The gear ratio affects the power transmission capabilities of the gear pulley system. Power is the rate at which work is done or energy is transferred. The gear ratio determines how the power is distributed between the driving and driven gears. In a gear pulley system, the power is equal to the product of torque and rotational speed. A higher gear ratio will result in a higher torque at the driven gear, allowing it to transmit more power to the connected system. Conversely, a lower gear ratio will result in a higher speed at the driven gear, enabling it to transmit power at a faster rate.

Mechanical Advantage:

The gear ratio provides mechanical advantage in a gear pulley system. Mechanical advantage refers to the ability of a system to amplify force or torque. A gear pulley with a higher gear ratio provides a greater mechanical advantage, allowing it to handle heavier loads or perform tasks that require more force. On the other hand, a gear pulley with a lower gear ratio provides a lower mechanical advantage but allows for higher speeds and faster operation.

Efficiency:

The gear ratio can also impact the overall efficiency of the gear pulley system. In general, gear systems with higher gear ratios tend to have lower efficiency due to increased friction and power losses. The additional teeth in the gear train result in more contact points and increased surface area, leading to higher friction losses. Therefore, it is important to consider the trade-off between speed, torque, and efficiency when selecting the gear ratio for a specific application.

Overall, the gear ratio in a gear pulley significantly affects its performance, including speed, torque, power transmission, mechanical advantage, and efficiency. By selecting the appropriate gear ratio, engineers and designers can optimize the gear pulley system for specific applications, ensuring the desired balance between speed, torque, and efficiency based on the requirements of the machinery or system.

gear pulley

What is a gear pulley, and how does it function in mechanical systems?

A gear pulley, also known as a gear and pulley system, combines the functionality of gears and pulleys to transmit power and control the speed and torque in mechanical systems. Here’s an explanation of what a gear pulley is and how it functions:

A gear pulley is a mechanical system that consists of two or more gears and one or more pulleys connected together. Gears are toothed wheels that mesh together to transmit rotational motion and torque, while pulleys are grooved wheels that use a belt or a rope to transmit motion and force. By combining these two components, a gear pulley system can achieve various mechanical advantages and control the speed and torque of the system.

The functioning of a gear pulley system can be understood through the following key points:

  1. Power Transmission: The primary function of a gear pulley system is to transmit power from one component to another. When the input gear or pulley is rotated, it causes the corresponding output gear or pulley to rotate as well. This rotation transfers power from the input to the output, allowing the system to perform work. The gears and pulleys enable the power to be transmitted efficiently and effectively across the system.
  2. Mechanical Advantage: Gear pulley systems provide mechanical advantage, allowing for the amplification or reduction of force and torque. Gears, with their different sizes and number of teeth, can change the rotational speed and torque of the system. By selecting gears with different ratios, the gear pulley system can increase the torque output while reducing the rotational speed (increased force, decreased speed) or increase the rotational speed while reducing the torque output (decreased force, increased speed).
  3. Speed Control: One of the key functions of a gear pulley system is speed control. By using gears with different sizes, the system can adjust the speed at which the output component rotates. Larger gears will result in slower output speed, while smaller gears will result in faster output speed. This feature is especially useful in applications where precise speed control is required, such as in machinery and automotive systems.
  4. Direction Control: The arrangement of gears and pulleys in a gear pulley system can also control the direction of rotation. By using various gear configurations, such as spur gears, bevel gears, or worm gears, the system can achieve different rotational directions. This allows for versatile control and manipulation of the mechanical system based on the desired outcome.
  5. Tension and Belt Control: In gear pulley systems that incorporate belts or ropes, the pulleys play a crucial role in maintaining tension and controlling the movement of the belts. The grooves on the pulleys ensure that the belts remain in place and transmit force efficiently. By adjusting the size and position of the pulleys, the tension in the belts can be controlled, ensuring smooth operation and reducing slippage.
  6. Transfer of Motion: A gear pulley system can transfer motion and power between non-parallel shafts, allowing for flexibility in mechanical designs. By using appropriate gears and pulleys, the system can change the direction of rotation, transfer motion at different angles, and transmit power between components that are not directly in line with each other. This versatility expands the range of applications where gear pulley systems can be employed.

In summary, a gear pulley system combines gears and pulleys to transmit power, control speed and torque, and achieve mechanical advantages in mechanical systems. By selecting appropriate gear ratios, sizes, and configurations, gear pulley systems provide efficient power transmission, speed control, direction control, tension control, and the transfer of motion in a wide range of applications.

China Best Sales Machinery Components Balancing Machine, Gear, Wheel, Pulley, Axle, Shaft, Grinding Spindle (PHQ-300H)   idler pulley	China Best Sales Machinery Components Balancing Machine, Gear, Wheel, Pulley, Axle, Shaft, Grinding Spindle (PHQ-300H)   idler pulley
editor by CX